C & Z Purlin
CREATIVE Purlins is a structural component, C&Z Purlins are processed Cold roll-formed from high Tensile steel coil to use as support for framed structures. They are designed to use as secondary support for roofing and cladding application. They are light weight, high tensile, efficient and economical requiring minimum maintenance and will last for longer period. It is available in customized length & it saves more than 30% of the steel by weight.
CREATIVE Purlin is cost effective in comparison to conventional structure element: channel section, angle section and tubular section.
| Bay Spacing | CREATIVE Purlin | Tubular Section | Hot rolled Channels | Angle Section | ||||
| (m) | Section | Wt (Kg/m) | Section | Wt (Kg/m) | Section | Wt (Kg/m) | Section | Wt (Kg/m) |
| 2500 | Z10010 | 1.75 | Tube 70*3 | 3.22 | ISMC 75 | 6.8 | 100*100*6 | 9.2 |
| 3300 | Z15015 | 3.56 | Tube 90*3 | 4.16 | ISMC 75 | 6.8 | 100*100*6 | 9.2 |
| 3800 | Z15015 | 3.56 | Tube 90*4 | 5.53 | ISMC 100 | 9.2 | 100*100*6 | 9.2 |
| 4250 | Z15015 | 3.56 | Tube 100*4 | 6.15 | ISMC 100 | 9.2 | 130*130*8 | 15.92 |
DL=0.1 KN/m2, LL=0.75 KN/m2, WL=1.6 KN/m2 (V=47m/sec), Purlin spacing =1.40 m
Note: Above table is intended for comparison only, and is not a substitute for professional judgment. Please contact Oriental professional Engineer for design purpose.
| Purlin | Zinc Coating (g/m2) | Thickness (mm) | Depth (mm) | length (m) |
| Z10010 | 120 | 1 | 102 | 6 |
| Z15015 | 120 | 1.5 | 152 | 6 |
Benefits
- Light weight and strong
- Greater spanning capability
- Zinc coating to provide longer life
- No welding at site
- No painting required after installation
- Lower maintenance cost
Joint Detail of Z & C Purlin Section.
Steel Deck Sheets (Mezzanine Floor)
Steel deck is made by cold forming structural grade sheet steel into a repeating pattern of parallel ribs. The strength and stiffness of the panels are a result of the shape of the ribs and the material properties of the steel. The present version of the Indian Standard for Cold Rolled Cold Annealed (CRCA) steel (IS 513) is not rich in content in respect to the structural applications that CRCA steel has been witne~sing in the country. With hot rolled (HR) Steel long available in grades like Yst 240 and Yst 310 for processing into CR ste~l, the exclusion of structural grade steel from IS 513 remains an enigma. Indian steel manufacturers also make Yst 550 grade of HR and thus availability of high tensile structural steel is a reality for structural grade CRCA material.
Application .
Steel deck for mezzanine floors . Tensile steel for composite slab construction that cuts down on slab thickness and dead weight of buildings. No separate formwork required for slab casting. . Form deck / sacrificial shuttering
Available Thickness . 0.8 mm, 1.0mm , 1.2 mm.1.5mm
Available Finish . CRCA and Galvanised.
Self Driling Screw & Other
Rainwater Systems & Accessories
Creative offers wide range of accessories and rain water systems to meet the customers expectation. The accessories are designed to take care of the purpose of the clients and to meet the aesthetic appearance. It provides an effective and efficient system providing total roofing solutions to the clients.
Accessories are also available in small , medium , heavy and customized sizes as per client’s requirements
Ridge Caps : Ridge Caps are available in similar colors as that of profile sheets.
Self Drilling Screw
Hot dipped galvanized with high durable protective triple coated, Self Tapping Screw (STS) Self Drilling Screw (SDS) to suit domestic and industrial roofing in customized colors matching your colorful roof
Use recommended fasteners only. Poor quality fasteners can damage the sheets in the long run as corrosion of the components may get transferred to color coated metal sheets.
For fixing SDS Screws
Use Torque adjustable electronic gun screw driver with a capacity of 500 w and @ 2000 – 2500 rpm.
The below dimensions indicated are approximate with the usual tolerance applicable
| FASTENERS | |
| Crest fixing for Trap Profile < 0.80mm TCT | SDS CS 12G- 14 TPI x 55mm long DTSS |
| For Cladding Valley Fixing < 0.80mm TCT | SDS CS 12G- 14 TPI x 25mm long |
| For Corrugation < 0.60mm TCT | SDS CS 12G- 14 TPI x 45mm long or 55mm long |
| For Tile Roof | SDS CS 12G- 14 TPI x 20mm long |
| For overlap Fixing | SDS CS 12G- 14 TPI x 20mm long |
| For Accessories | |
Turbo Ventilators
Creative wind ventilator has introduced and promoted wind ventilation as a ‘New Concept’ in India with the twin objectives of power conservation in places where power is available: and ventilation in places where power is not available.
Creative Building Systems has engineered Wind Ventilators . Once installed, wind ventilators get rid of recurring electricity charges associated with conventional systems providing round-the-clock ventilation, are maintenance-free, and eliminate chances of electrical short circuits. They also save on labor required to operate conventional systems.
| SPECIFICATION FOR VENTILATOR | ||
| S.No. | Description | |
| 1 | Model | Creative-24 |
| 2 | Ventilator Size | 24″ |
| 3 | Ventilator Height | 400MM |
| 4 | MOC of Vanes | Aluminium 0.45 mm |
| 5 | MOC of Top Plate | Aluminium 1.0 MM |
| 6 | MOC of Bottom Ring | FRP |
| 7 | Weight of Ventilator | 6.5 Kg |
| 8 | Center Width of Ventilator | 750 MM |
| 9 | Dia of Bottom Ring | 24″ |
| 10 | Nos of Vanes | 42 |
| 11 | Thickness of Vanes | 0.45 |
| 12 | Nos of Bearing | 2 Nos. |
| 13 | Bearing Type | SKF make ZZ 6001 |
| 14 | Rivets | Al-magnisium Alloy |
| 15 | Bush | Nil |
| 16 | Shaft & Connecting Rod | SS |
| 17 | Bolts & Nuts | Galvanised steel |
| 18 | Base | FRP |
| 19 | Support | MS |
| 20 | Discharge capecity @6MPH | 95000Cft/Hr |